INTERNEWORKING WITH MICROSOFT TCP/IP
ON WINDOWS NT 4.0 (Chapter 5- Sample Questions)
(EXAM - 059)
Please note that the following sample questions from the "MCSE & MCP + Internet: Accelerated Study Guide"
are provided for personal use only. They may not be copied or published without the
permission of the publisher. However, a link to the page can be established only with the
prior permission of the publisher. S.T.E.P.S Homepage
SAMPLE QUESTIONS FROM "MCSE & MCP +
INTERNET ACCELERATED STUDY GUIDE"
| 1 |
John is trying to connect to
a computer in a different subnet. Computer's NetBIOS name is DOVE. He has the IP address
of DOVE. He tries to use PING to test whether he can create a connection. He tries both IP
address and NetBIOS name after PING command. He cannot get any response from DOVE. He then
tries to ping default gateway address and he receives a response. Then, he tries to ping
other computers in that subnet and no problem at all. Now, why can't John get a response
from DOVE? |
| a) |
The IP configuration on DOVE is
incorrect. |
| b) |
WINS and DNS are not enabled on
DOVE. |
| c) |
There might be an IP configuration
error with John's workstation. |
| d) |
The subnet John is on has IP
configuration problem. |
| 2 |
How can you capture TCP/IP
packets and decode them as well? |
| a) |
Use Performance Monitor |
| b) |
Use Disk Management Utilities |
| c) |
Use Network Monitor |
| d) |
Use Performance Management in the
Task Manager |
| 3 |
How can you display routing
tables? (Choose two) |
| a) |
netstat -r |
| b) |
tracert |
| c) |
route print |
| d) |
ping |
| 4 |
You ping your computer to
test IP configuration and you receive no response. What is wrong with your computer? |
| a) |
Default gateway address is either
wrong or not entered. |
| b) |
Subnet mask is incorrect. |
| c) |
Your network is using C class IP
instead of B or A class. |
| d) |
TCP/IP is not properly installed
to your computer. |
| 5 |
How can you connect a print
device to a Windows NT Server which will be available to all Unix computers on your
network? |
| a) |
Install Microsoft TCP/IP Printing
service on the Windows NT Server and share the printer with an appropriate name. |
| b) |
Install Microsoft TCP/IP Printing
service on the Unix Server and share the printer with an IP address name. |
| c) |
Install Microsoft TCP/IP Printing
service on a Unix client and establish a relationship between Unix client and NT Server. |
| d) |
None of the above |
| 6 |
What is the best way of
implementing name resolutions with LMHOSTS file on an enterprise network? |
| a) |
One entry for the PDC in the local
domain and one entry for both BDCs and PDCs in each remote domain. |
| b) |
One entry for each domain
controllers (BDCs and PDCs) in the local domain and no entry for PDCs in remote domains is
necessary. |
| c) |
Two entries for each domain
controllers (BDCs and PDCs) in the local domain and two entries for only PDC in each
remote domain. |
| d) |
One entry for each domain
controllers (BDCs and PDCs) in the local domain and one entry for only PDC in each remote
domain. |
| 7 |
Your network consist of
Windows NT and Unix machines. You entered IP addresses and hostnames of Unix machines to
the DNS server database. You configured Windows NT machines to use WINS server for NetBIOS
name resolutions. Now, you want host name and NetBIOS name resolutions to occur in your
network without spending a lot of effort. How can you achieve this? |
| a) |
Enable HOSTS name resolutions on
the DNS Server. |
| b) |
Enable LMHOSTS name resolutions on
the DNS Server. |
| c) |
Enable WINS resolutions on the DNS
Server. |
| d) |
None of the above |
| 8 |
Your organisation has a host
name for the Internet Server www.incom.com.au. You ping the IP address of the server and
receive a response, however when you ping the host name you cannot get a response. What is
the possible problem? |
| a) |
www.incom.com.au is not mapped in
the DNS server. |
| b) |
www.incom.com.au is not mapped in
the WINS server. |
| c) |
www.incom.com.au is not mapped in
the LMHOSTS file. |
| d) |
www.incom.com.au is not mapped in
the DHCP server. |
| 9 |
How can you set up a Windows
NT Server machine as a static multihomed router? |
| a) |
You cannot setup a Windows NT
Server machine as a static multihomed router. |
| b) |
Make sure that IP forwarding is
enabled. |
| c) |
Configure each network adapter
card with the same subnet mask address. |
| d) |
All of the above |
| 10 |
When would you install WINS
proxies? |
| a) |
If you have two WINS server in a
network |
| b) |
If you cannot place a WINS server
in each Internetwork |
| c) |
If you don't have a DHCP server |
| d) |
If you don't have a DNS server |
| 11 |
Which of the following
protocols does PPTP not support? (Choose two) |
| a) |
IP |
| b) |
IPX |
| c) |
DLC |
| d) |
NETBEUI |
| e) |
APPLETALK |
| 12 |
How can you configure the
routing tables on a server in a most efficient way? |
| a) |
Install WINS server |
| b) |
install RIP for IPX |
| c) |
install RIP for IP |
| d) |
Install DHCP server |
| 13 |
Why would you add a static
mapping for the Unix machines in WINS server and exclude the IP address of these Unix
machines in all DHCP scopes? |
| a) |
There is no reason to do this. |
| b) |
If you have Unix machines on your
network and want these machines to use both DHCP and WINS server on your network. |
| c) |
You should do this to establish a
trust relationship between Unix servers and NT server domains. |
| d) |
Both b and c |
| 14 |
Which one of the following
commands allow you to see the print queue in a TCP/IP print server? |
| a) |
lpd |
| b) |
lpr |
| c) |
lpq |
| d) |
lpx |
| 15 |
If your workstation
broadcasts ARP request for the IP address of a remote computer while you are trying to
connect to a Windows NT server on another subnet and no one else have this problem on your
network, what might be the possible problem? |
| a) |
Your workstation has an incorrect
default gateway address. |
| b) |
Your workstation has an incorrect
subnet mask. |
| c) |
TCP/IP is not installed on your
workstation. |
| d) |
TCP/IP is not installed on the
destination computer. |
| 16 |
You have 50 Windows NT
workstation computers on your network. Your network uses WINS server for NetBIOS name
resolution. They all can browse each other and name resolution is not a problem at all.
Today you have added a new workstation to your network and installed TCP/IP. From other
machine you ping this new workstation's IP address and you receive response. However when
you try to ping by using its NetBIOS name, you get an error message. You can ping all
other computers with their NetBIOS name. What is the most likely problem? |
| a) |
TCP/IP is not installed properly
on this workstation. |
| b) |
TCP/IP is not installed on the
WINS server. |
| c) |
DNS server cannot communicate with
WINS server. |
| d) |
This workstation does not get its
IP address from a DHCP server. |
| e) |
This workstation is not configured
with the IP address of the WINS server. |
| 17 |
You are trying to connect
other computers on your subnet through TCP/IP utilities and you cannot achieve this. You
are sure that you have installed TCP/IP on your workstation. You try to ping loopback and
it is okay. What might be the possible problem? |
| a) |
Your workstation has an incorrect
IP address. |
| b) |
Your workstation has an incorrect
default gateway address. |
| c) |
Your workstation has an incorrect
subnet mask. |
| d) |
Other computer on the subnet have
wrong default gateway addresses. |
| 18 |
How can you prevent
unauthorised SNMP management consoles from managing your server? |
| a) |
You should unselect the option of
"Only Accept SNMP Packets From These Hosts". |
| b) |
You should select the option of
"Only Accept SNMP Packets From These Hosts". |
| c) |
Implement a password protection
method on your server. |
| d) |
Use encryption methods on your
server. |
| 19 |
If you have a duplicate IP
address error message on your DHCP enabled network, what causes this problem to occur? |
| a) |
Unreplicated WINS servers |
| b) |
Unreplicated DNS servers |
| c) |
Duplicated IP addresses in HOSTS
and LMHOSTS files |
| d) |
Overlapping DHCP scopes |
| 20 |
If you want to collect and save TCP/IP
statistics for future analysis in Excel, which of the
following tools do you need to use? |
| a) |
Network
Monitor |
| b) |
Performance
Monitor |
| c) |
Task
Manager |
| d) |
Tracert
or Netstat |
| 21 |
You would like to replicate Sydney WINS server
database to the Brisbane WINS server database and vice
versa. You also want to make sure Sydney WINS database is
replicated to Brisbane’s WINS database at least once
a day. How can you achieve this? |
| a) |
Configure Brisbane to pull
Sydney's WINS database update information once every 24 hours and then Sydney to pull
Brisbane's WINS database once every 24 hours. |
| b) |
Configure Brisbane to push
Sydney's WINS database update information once every 24 hours and then Sydney to push
Brisbane's WINS database once every 24 hours. |
| c) |
Configure Brisbane to pull
Sydney's WINS database update information once every 24 hours and then Sydney to push
Brisbane's WINS database once every 24 hours. |
| 22 |
Which of the following
utilities would you use to see how many hops does it take from your server to another in a
remote network, and to determine whether a router has failed or not or whether a router is
slow or not? |
| a) |
ipconfig /all |
| b) |
tracert |
| c) |
nbtstat |
| d) |
netstat |
| 23 |
When you set up a DHCP Relay
Agent, which of the following information would you need to add? |
| a) |
IP address of the DHCP server |
| b) |
Subnet Mask of the DHCP server |
| c) |
Default Gateway address of the
DHCP server |
| d) |
The Domain Name where DHCP resides |
| 24 |
If you are having IP address
to hostname resolution problem, which of the following troubleshooting utilities would you
use? |
| a) |
PING |
| b) |
NSLOOKUP |
| c) |
TRACERT |
| d) |
NETSTAT |
| e) |
NBTSTAT |
| 25 |
You are providing
consultancy to a small company. You setup a Windows NT based network with RAS server (as a
router) that will connect network to an Internet Service Provider. You don't have a
registered IP address for the company. How can you configure RAS server so that you use IP
addresses allocated by the Internet Service Provider? |
| a) |
You should enter a default gateway
address in the RAS server. |
| b) |
You should leave the default
gateway address blank in the RAS server. |
| c) |
You cannot do this with RAS
server. |
| d) |
None of the above |
| 26 |
On your network, if you are
not using WINS server for NetBIOS name resolution, which one of the following options can
be a candidate for this task? |
| a) |
DNS |
| b) |
DHCP |
| c) |
HOSTS |
| d) |
LMHOSTS |
| 27 |
Which of the following
commands would you use to send a file to a TCP/IP print server? |
| a) |
lpr |
| b) |
lpd |
| c) |
lpq |
| d) |
print |
| 28 |
On your domain you have a
PDC.
The IP address of the PDC is 207.11.6.89.
The name of the PDC is: BOOKWORM.
The name of the domain where this PDC located is INFORMATION. Which of the following
entries in an LMHOSTS file is correct for this PDC? |
| a) |
207.11.6.89 INFORMATION #PRE
#DOM:BOOKWORM |
| b) |
207.11.6.89 BOOKWORM #PRE
#DOM:INFORMATION |
| c) |
207.11.6.89 BOOKWORM #DOM
#PRE:INFORMATION |
| d) |
207.11.6.89 #PRE #DOM:BOOKWORM/
INFORMATION |
| 29 |
What is the syntax for ROUTE
ADD command? |
| a) |
ROUTER ADD [destination network
id] MASK [subnet mask] [gateway address] |
| b) |
ROUTER ADD [destination network
id] [gateway address] MASK [subnet mask] |
| c) |
ROUTER ADD MASK [subnet mask]
[gateway address] [destination network id] |
| d) |
ROUTER ADD [gateway address]
[destination network id] MASK [subnet mask] |
| 30 |
Which of the following
utilities would you use to examine the IP Address to MAC address resolution for outgoing
packets on a Windows NT Server machine? |
| a) |
PING |
| b) |
NETSTAT |
| c) |
NBTSTAT |
| d) |
ARP |
| 31 |
Which TCP/IP utility would
you use to see a list of NetBIOS names cached on your server machine? |
| a) |
tracert |
| b) |
ping |
| c) |
nbtstat |
| d) |
netstat |
| 32 |
You want your Unix server to
get TCP/IP statistics from a Windows NT server machine which is on the same network. How
can you achieve this? |
| a) |
SNMP management software on the
Windows NT server machine, and the SNMP service on the Unix server machine. |
| b) |
SNMP management software on the
Unix server machine, and the SNMP service on the Windows NT server machine. |
| c) |
SNMP management software and the
SNMP service both on the Windows NT server and the Unix server machines. |
| d) |
None of the above |
| 33 |
Which one of the following 5
static entries in WINS would you use to add a Unix computer? |
| a) |
Domain Name |
| b) |
Group |
| c) |
Internet Group |
| d) |
Unique |
| e) |
Multihomed |
| 34 |
You want a server to have a
specific IP address all the time from the DHCP server. You are making a client
reservation. How can you achieve this? |
| a) |
Use IP address of the server |
| b) |
Use NetBIOS name of the server |
| c) |
Use Physical Address of the server |
| d) |
Use subnet mask of the server |
| 35 |
You can ping a remote
Windows NT Workstation computer by its IP address but not with its NetBIOS name. What is
the likely problem? |
| a) |
DNS is not enabled in the
workstation computer |
| b) |
WINS is not enabled in the
workstation computer |
| c) |
DHCP is not enabled in the
workstation computer |
| d) |
All of the above |
| 36 |
Which of the following
utilities would you use to download and upload data in a TCP/IP network? |
| a) |
TELNET |
| b) |
FINGER |
| c) |
FTP |
| d) |
All of the above |
| 37 |
If you want all Windows NT
Workstations and Windows 95 clients to get IP addresses automatically from a server, what
kind of server do you need to implement? |
| a) |
A WINS server |
| b) |
A DNS server |
| c) |
A DHCP server |
| d) |
All of the above |
| 38 |
How can you implement a
backup DNS server? |
| a) |
As cache only server |
| b) |
As forwarder server |
| c) |
As secondary server |
| d) |
All of the above |
| 39 |
How can you implement load
balancing for DNS servers? |
| a) |
As cache only server |
| b) |
As forwarder server |
| c) |
As secondary server |
| d) |
All of the above |
| 40 |
Which of the following
utilities would you use to purge the NetBIOS name cache? |
| a) |
NETSTAT |
| b) |
NBTSTAT |
| c) |
ROUTE |
| d) |
PURGE |
| 41 |
Which of the following
utilities allow you to see both DHCP and WINS configuration on the command prompt? |
| a) |
ipconfig /all |
| b) |
ipconfig |
| c) |
tracert |
| d) |
netstat |
| 42 |
To provide encrypted
security to prevent unauthorised users to access your NT server through the Internet,
which of the following protocols do you need to use? |
| a) |
PPP |
| b) |
PPTP |
| c) |
SLIP |
| d) |
None of the above |
| 43 |
You want to resolve host
names to IP address on your network. If you don't install DNS server, how can you achieve
this? |
| a) |
Use WINS server |
| b) |
Use LMHOSTS file |
| c) |
Use HOSTS file |
| d) |
None of the above |
| 44 |
Which of the following
TCP/IP utility would you use to see protocol statistics and the current activity of TCP
and UDP ports on the local system? |
| a) |
nbtstat |
| b) |
ping |
| c) |
netstat |
| d) |
tracert |
| 45 |
You have upgraded an old
network. The upgraded network has only Windows NT and Windows 95 clients. All servers are
Windows NT 4.0. Since your network has branches all over the world, you are using routers
as connection devices. For this reason your network has both TCP/IP and NetBEUI as
protocols. NetBIOS name resolution is very important in the whole network. Which one of
the following method provides the most efficient and easy way to achieve it? |
| a) |
DNS |
| b) |
WINS |
| c) |
LMHOSTS |
| d) |
DHCP |
| 46 |
If you want to set up an
additional DNS server to use processing DNS queries for Internet resources, how can you
configure this additional DNS? |
| a) |
Primary |
| b) |
Secondary |
| c) |
Forwarder |
| d) |
All of the above |
| 47 |
Which of the following tools
allow you to see TCP/IP protocol statistics in a chart format view? |
| a) |
Network Monitor |
| b) |
Performance Monitor |
| c) |
Netstat and Nbtstat |
| d) |
Tracert and ipconfig/all |
| 48 |
If you would like to create
an alias for a given hostname, which resource record do you need to add on your DNS
server? |
| a) |
MX |
| b) |
PTR |
| c) |
CNAME |
| d) |
none of the above |
| 49 |
How can you make sure that all clients on your
network to use DNS server for host name resolution? |
| a) |
Enable DNS only on server machine. |
| b) |
Enable DNS on each client machine. |
| c) |
Enable DNS on each DHCP server. |
| d) |
Enable DNS on each WINS server. |
| 50 |
While calculating amount of
necessary host IDs on your network, during the planning period, what should you consider? |
| a) |
Host ID for each server |
| b) |
Host ID for each network adapter
card and for each router interface |
| c) |
Host ID for each client |
| d) |
Host ID for any device on the
network |
| 51 |
Your network has 4 subnets and you would like to
implement 2 DHCP servers for automatic IP addressing. To
provide fault tolerance, what is the minimum requirement? |
| 51a) |
4 scopes on each server |
| b) |
4 scopes on one server |
| c) |
2 scopes on each server |
| d) |
2 scopes on the first server and
another 2 scopes on the second server |
| 52 |
Your company has the network
address of 131.50.50.10. You would like to create 6 subnets. Which of the following subnet
number is suitable for this purpose? |
| a) |
255.255.224.0 |
| b) |
255.255..240.0 |
| c) |
255.255..248.0 |
| d) |
255.255.252.0 |
| 53 |
Your company has the network
address of 80.0.0.0. You would like to create 62 subnets. Which of the following subnet
number is suitable for this purpose? |
| a) |
255.192.0.0 |
| b) |
255.224.0.0 |
| c) |
255.240.0.0 |
| d) |
255.252.0.0 |
| 54 |
Your company has the network
address of 150.6.0.0. You need minimum 3000 hosts. You have selected 255.255.240.0 as
subnet mask. How many subnets can you create? |
| a) |
6 |
| b) |
14 |
| c) |
30 |
| d) |
52 |
| 55 |
Which of the following IP
class provides you the highest number of networks for your Intranet? |
| a) |
Class A |
| b) |
Class B |
| c) |
Class C |
| 56 |
Which of the following IP
class provides you the highest number of hosts per network for your Intranet? |
| a) |
Class A |
| b) |
Class B |
| c) |
Class C |
| 57 |
Your network address is
47.0.0.0. Subnet mask is 255.255.0.0, and you have 2 subnets. What are the ranges of host
IDs for this network configuration? (Choose 2 options) |
| a) |
Network 1 is 47.a.0.1-47.a.255.254 |
| b) |
Network 2 is 47.b.0.1-47.b.255.254 |
| c) |
Network 1 is 47.a.0.1-47.a.1.254 |
| d) |
Network 2 is 47.b.0.1-47.b.1.254 |
| 58 |
Why is RIP not recommended
for a large internetwork? (Choose the best option.) |
| a) |
Because it is not reliable at all. |
| b) |
Because it creates too much
broadcast traffic. |
| c) |
Because it is too slow. |
| d) |
Because it is a third party
software. |
Thank you for visiting our site.
© S.T.E.P.S. CONSULTING PTY. LTD. 1998
Return to MCSE & MCP + Internet: Accelerated Study Guide Page
S.T.E.P.S Homepage